Tace Iska Mai Mataki Da Yawa: Dalilin da Yasa Tsarkakewa Mai Mataki 6 Ya Fi Nau'ikan Asali

Matattara ɗaya tana sarrafa barbashi. Matattara shida tana sarrafa komai.

Iskar cikin gida cakuda ce mai rikitarwa ta abubuwa masu ƙuraje, iskar gas, ƙamshi, da gurɓatattun halittu. Injin tsarkake iska mai mataki ɗaya mai matattarar HEPA kawai zai iya ɗaukar barbashi - amma ba ya yin komai game da formaldehyde, ƙamshin girki, ko ƙwayoyin cuta. Tsarin tsarkake iska mai matakai da yawa yana magance kowane aji mai gurɓatawa tare da wani mataki na musamman, yana samar da cikakken tsaftace iska wanda babu wata fasaha da za ta iya daidaitawa.

Ga masu siyan B2B, fahimtar abin da kowane mataki yake yi a zahiri - da kuma waɗanne haɗuwa ke samar da ƙimar aiki ta gaske idan aka kwatanta da kasuwar siyayya - yana da mahimmanci don gina layin samfura masu gasa. Wannan labarin ya bayyana kowane mataki na tsarin tsarkakewa mai matakai 6, abin da yake cirewa, da kuma dalilin da yasa ƙirar matakai da yawa ke cin nasara a cikin aikin gaske.

Matakai 6 na Tsaftace Iska Mai Mataki-mataki Da Yawa

Tsarin tsarkake iska mai matakai 6 na yau da kullun yana haɗa fasahohin da ke tafe a jere. Kowane mataki yana ɗaukar takamaiman nau'in gurɓataccen abu:

Mataki na 1: Tace Kafin Tace — Layin Tsaro na Farko

Matatar mai kauri ko kuma wacce ba a saka ba wadda ke ɗaukar manyan ƙwayoyin cuta: ƙura, gashi, ƙurar dabbobin gida, da kuma lint (>10 µm). Matatar mai kafin ta kare matakan da ke ƙasa daga toshewa kuma tana tsawaita rayuwar matatar HEPA sau 2-3. Yawancin matatun da aka riga aka riga aka riga aka fara ana iya wanke su kuma ana iya sake amfani da su, wanda hakan ke sa su zama mataki na farko mai rahusa, mai tasiri sosai.

Mataki na 2: Matatar HEPA — Dokin Aiki na Ƙwayoyin Cuku

Matatar HEPA ta Gaskiya (H13/H14) tana ɗaukar kashi 99.97% na ƙwayoyin cuta a 0.3 µm - girman ƙwayoyin cuta mafi shiga. Wannan matakin yana magance PM2.5, PM10, pollen, ƙwayoyin cuta na mold, ƙura, da ƙwayoyin cuta da ke ɗauke da ƙwayoyin cuta. HEPA shine kawai matakin da ke cire ƙananan ƙwayoyin cuta daga iska, kuma shine ginshiƙin aikin duk wani mai tsarkakewa mai tsanani.

Mataki na 3: Carbon Mai Aiki — Mai Shafa Iskar Gas

Carbon da aka kunna (yawanci tushen harsashin kwakwa) yana shaƙar gurɓatattun iskar gas: VOCs, formaldehyde, benzene, hayakin taba, da ƙamshi. Tsarin carbon mai ramuka sosai (gram 1 = ~1,000 m² yankin saman) yana kama ƙwayoyin iskar gas a zahiri. Muhimmi: carbon yana cika akan lokaci kuma dole ne a maye gurbinsa - tsawon rayuwarsa ya dogara sosai akan nauyin gurɓataccen da yake fuskanta.

Mataki na 4: Hasken UV-C — Matakin Kashe Kwayoyin Cuta

Fitilar UV-C (tsawo mai tsawon nm 254) tana kashe ƙwayoyin cuta, ƙwayoyin cuta, da ƙwayoyin cuta ta hanyar lalata DNA/RNA ɗinsu, tana hana haifuwa. UV-C tana aiki mafi kyau tare da HEPA: HEPA tana kama ƙwayoyin cuta, kuma UV-C tana kashe su. Dole ne a rufe fitilar gaba ɗaya don hana fallasa UV kai tsaye ga masu amfani. Tsawon rayuwa na yau da kullun: awanni 8,000-12,000.

Mataki na 5: Janareta na ion mara kyau — Caja na Barbashi

Injin samar da ion mai kama da na'urar ...

Mataki na 6: Mai Sanya Sanyi / Mai Sanya Photocatalyst — Mai Rushe Sinadaran

Mataki na ƙarshe yana amfani da fasahar catalytic don lalata gurɓatattun abubuwa waɗanda matakin carbon ba zai iya sarrafa su gaba ɗaya ba. Mai haɓaka sanyi (mai haɓaka catalytic catalytic a yanayin zafi na ɗaki) yana lalata formaldehyde da ƙamshi ba tare da UV ba; mai haɓaka photocatalyst (TiO₂ + UV) yana lalata VOCs, ƙwayoyin cuta, da mold a matakin kwayoyin halitta. Wannan matakin yana canza gurɓatattun abubuwa zuwa CO₂ da H₂O marasa lahani maimakon kawai ya kama su.

Dalilin da yasa Tsarin Matakai Da yawa ke Ba da Sakamako Mai Kyau

Gibin aiki tsakanin masu tsarkakewa na mataki ɗaya da matakai da yawa ba abu ne mai sauƙi ba - yana da rarrabuwa. Ga yadda kwatancen yake:

• Rufe barbashi: HEPA mai mataki ɗaya yana ɗaukar barbashi kawai. Matakai da yawa yana ƙara cajin ion don barbashi masu submicron da HEPA ya rasa.

• Rufe iskar gas: HEPA mai mataki ɗaya yana cire sifili na iskar gas. Matakan Carbon + na catalyst suna magance formaldehyde, VOCs, da ƙamshi.

• Rufewar halittu: HEPA mai mataki ɗaya yana kama ƙwayoyin cuta amma baya kashe su. UV-C yana kashe su, yana hana sake girma a cikin matatar.

• Tsawon lokacin da matattara ke ɗauka: Matattar da aka riga aka yi amfani da ita tana kare HEPA, tana tsawaita lokacin maye gurbin daga watanni 6 zuwa watanni 12-18 a lokacin da aka saba amfani da ita.

• Inganci na gaske: Tsarin matakai da yawa suna kiyaye CADR mafi girma akan lokaci saboda kowane mataki yana kare na gaba daga lodin da bai yi ba.

Kwatanta Aiki Mataki-da-Mataki

Abin da Kowane Mataki ke Cirewa

Tsarin Matakai Daban-Daban da Aka Yi Amfani da Su a Kasuwa

Ba duk masu tsarkakewa masu matakai da yawa aka ƙirƙira su iri ɗaya ba. Ga tsare-tsare gama gari da masu siyan B2B za su fuskanta:

• Matakai 3 (Tace kafin a tace + HEPA + Carbon) — Matsayin shigarwa. Yana rufe barbashi da iskar gas mai sauƙi. Ya isa ga amfani da gida gabaɗaya a wuraren gurɓataccen iska.

• Mataki na 4 (yana ƙara UV-C ko Ionizer) — Yana ƙara kariyar halittu ko cajin ƙwayoyin cuta. Tsarin matsakaici na gama gari; matakin da aka ƙara sau da yawa shine babban abin da ke bambanta tallan.

• Mataki na 5 (Tace kafin lokaci + HEPA + Carbon + UV-C + Ionizer) — Tsarin "premium" na yau da kullun. Cikakken barbashi, iskar gas, da kuma yanayin halittu.

• Mataki na 6 (yana ƙara Mai Sanya Sanyi / Mai Sanya Photocatalyst) — Tsarin farko. Yana ƙara lalata sinadarai na formaldehyde da ƙamshi mai ɗorewa - mafi girman wurin sayarwa ga kasuwannin sabbin gidaje da gyare-gyare.

Yadda Ake Tabbatar Da'awar Aiki Mai Mataki-mataki Da Yawa

Kalmar "mataki na 6" ana yawan amfani da ita azaman alamar talla ba tare da ingantaccen aiki mai ma'ana ba. Ya kamata masu siyan B2B su tabbatar:

✓ CADR a kowane mataki — Nemi rahotannin gwajin CADR (GB/T 18801 ko AHAM AC-1) wanda ke nuna gudummawar kowane mataki. Mai tsarkakewa yana da sauri kamar matakin da ya fi rauni.

✓ Formaldehyde CADR — Ga na'urorin da ke da'awar cire carbon/catalyst VOC, formaldehyde CADR (wanda aka auna a cikin m³/h) shine ma'aunin ma'auni. Na'urar matakai 6 ba tare da bayanan formaldehyde CADR ba tana isar da cire gas.

✓ Yawan UV-C — Ingancin kashe ƙwayoyin cuta ya dogara da yawan UV (ƙarfi × lokacin fallasa). Nemi adadin UV da sakamakon gwajin dakin gwaje-gwaje akan takamaiman ƙwayoyin cuta (misali, H1N1, E. coli).

✓ Takaddun shaida na Ozone — Idan na'urar ta ƙunshi na'urar ionizer, nemi takardar shaidar fitarwa ta ozone (<50 ppb) daga dakin gwaje-gwaje da aka amince da su.

✓ Kudin maye gurbin matattara — Tsarin matakai da yawa suna da abubuwan amfani da yawa. Lissafa jimlar farashin matattara na shekara - wannan sau da yawa ya fi sau 2-3 fiye da na'urori masu matakai ɗaya kuma yana shafar jimillar farashin mallakar mai amfani.

Binciken Farashi: Shin Mataki na 6 Ya Dace da Kyauta?

Amsar gaskiya: ya dogara da kasuwar da aka yi niyya da kuma yanayin amfani.

• Don sabbin gidaje da gyare-gyare — Eh. Rashin iskar gas na formaldehyde shine matsalar iska ta cikin gida ta farko, kuma matakan carbon + masu kara kuzari ne kawai ke magance ta. Tsaftacewa mai matakai 6 shine mafita mafi ƙarfi.

• Ga gidajen da ke da rashin lafiyan jiki — Na'urar mataki 3-4 (HEPA + matattarar riga-kafi, ko UV) tana isar da kashi 90% na ƙimar a kashi 60% na farashin. Matakin ƙara kuzari yana ƙara wa masu rashin lafiyan jiki ƙarancin amfani.

• Ga gidajen shan taba/dabbobi — Haɗin sinadarin carbon + mai kara kuzari yana da amfani ga wari mai ɗorewa. An tabbatar da cewa na'urar mataki 5-6 ce.

• Ga ribar B2B — Kudin BOM na ƙara UV-C, ionizer, da matakan catalyst kusan $8-20 ne ga kowace raka'a, wanda ke tallafawa ƙarin farashin dillalai na $30-80. Faɗaɗar ribar yana da mahimmanci idan saitin fasalin ya kasance abin dogaro.

Ja Tutocin: Lokacin da "Mataki na 6" Yake Tallatawa a Gidan Wasan Kwaikwayo

✗ Ƙirga fanka, makullin wutar lantarki, ko gidan a matsayin "mataki" — Wasu samfuran suna ƙara yawan matakan da abubuwan da ba sa tacewa.

✗ An ƙirga HEPA mai rufi da carbon a matsayin matakai biyu — Haɗin HEPA+carbon mataki ɗaya ne na aiki, ba biyu ba.

✗ Babu bayanan aiki a kowane mataki — Idan alamar ba za ta iya nuna CADR ko bayanan cirewa a kowane mataki ba, ƙididdigewar matakan wataƙila ta zama abin ado.

✗ Da'awar da ba za a iya tantancewa ba — "cire kashi 99.99%" ba tare da bayyana gurɓataccen abu, ƙa'idar gwaji, ko yanayin ɗakin ba da'awa ce mai ma'ana ba.

Kammalawa: Zayyana Samfurin da Za a Iya Amince da Shi Mai Matakai Daban-daban

Tacewa mai matakai da yawa shine amsar injiniya da ta dace ga sarkakiyar gurɓatar iska a cikin gida - amma sai lokacin da kowane mataki ya yi aiki da gaske. Tsarin da ya yi nasara ga masu siyan B2B:

1. Adadin matakan daidaitawa zuwa kasuwa da aka yi niyya: matakai 3-4 don sassan ƙima, matakai 5-6 don kasuwanni masu ƙima da waɗanda suka shafi matsaloli (sabbin gidaje, hayaki, dabbobin gida)

2. Buƙatar bayanai kan aiki na kowane mataki (CADR, formaldehyde CADR, kashi na UV, takardar shaidar ozone) daga masu samar da kayayyaki kafin aiwatar da shi

3. Da gaske, farashin kayan masarufi ya yi daidai — farashin maye gurbin matattara babban abin da ke yanke shawara ga mai amfani da ƙarshen kuma yana haifar da yawan samun kuɗi a gare ku.

4. Bambanta da matakin mai kara kuzari - lalata sinadarai shine labarin haɓakawa mafi inganci idan aka kwatanta da tace barbashi na asali

5. Tabbatar da da'awa tare da rahotannin dakin gwaje-gwaje na ɓangare na uku - sahihanci shine bambancin #1 a cikin kasuwa cike da hauhawar farashin farashi

Interested in building a credible multi-stage air purifier product line? Contact us at ada5@airdow.com for stage-by-stage performance data, OEM filter options, and product configuration consultation.